
5-6 Updating the Site Master Firmware System Operations
5-8 PN: 10580-00252 Rev. E Site Master User Guide
5-6 Updating the Site Master Firmware
Please review the MST User Guide section on copying firmware to a USB memory device.
1. Run Master Software Tools and load the firmware update onto the USB memory device.
Review the section (in MST Help) that discusses this process.
2. After the firmware is loaded, insert the USB memory device into the USB port of the
instrument.
3. Press the following key sequence: Shift > System (8) > System Options > Reset >
Update Firmware. The Load Firmware main menu key is displayed.
4. Press the Load Firmware main menu key to list the Firmware Update menu and
Update Application Firmware submenu key.
5. Press the Update Application Firmware submenu key and the Firmware Update dialog
opens.
6. Highlight each of the save choices: Save None, Save User Data, and Save & Restore User
Data. Read through each choice carefully and then select the desired save mode.
• Save None: No attempt will be made to save any user data.
• Save User Data: User data will be save to the selected external media device.
• Save & Restore: User data will be saved to the selected external media device.
The instrument will also attempt to restore the files to the instrument after the
update.
7. Press Enter to begin the firmware update process. To abort the process, press Esc then
choose another analyzer mode or power down.
8. The Firmware Update dialog will query you to confirm the process by pressing Enter to
continue or Esc to abort.
9. Select Enter and the firmware update process begins and the Firmware Update dialog
displays the following message
Updating firmware. Please Wait.
10. When complete, the instrument will reboot.
Warning
If there is not enough available memory space for all user data, then some data
may be lost during this process.
Warning
If there is not enough available memory space for all user data, then some data
may be lost during this process.
Comentarios a estos manuales